As the batteries in an SM4 series recorder die, the hardware can start acting incorrectly. One symptom of this is seeing the message "Fatal Clock Error" when you try to turn the recorder on. This can commonly be resolved by one of two methods:

• Turn the SM4 off and replace the batteries with brand new alkaline cells (Energizer brand recommended). Wait at least 30 seconds, then turn the SM4 back on. Repeat the cycle of turning the recorder off and on 5 more times if necessary, letting the unit remain off for 30 seconds each time.
• If the previous method doesn't work, turn the recorder off. Remove the small, disk-shaped clock battery, wait 1 minute, and turn the recorder on. If the unit turns on normally now, you can turn the recorder off and reinsert the battery. Make sure that the battery is inserted under the small metal contacts, and note that you will likely have to reset the recorder's clock.

If neither of these methods resolves the issue, please contact Wildlife Acoustics support.

• Why can't I use an adapter to connect a USB-C Echo Meter Touch to my Lightning iOS device?
• What type of plug does my Echo Meter Touch module have?
• What iOS devices are compatible with my Echo Meter Touch module?
• Can I use Echo Meter Touch modules with USB connectors with iOS devices?
• What adapter do I need for my Echo Meter Touch module and Android or iOS device?
• What type of data port does my phone or tablet have?
• How do I update the firmware on my Echo Meter Touch module with USB to add iOS compatibility?
• Are there acoustic differences between the first- and second-generation Mini Bat recorders?
• Will the Lithium-ion lids I used with first-generation Minis fit the new models?
• Will the security bracket accessory I use with first-generation Minis be compatible with the new models?
• Will Wildlife Acoustics continue to repair and support first-generation Minis with replacement parts?
• Are there size differences between the first- and second-generation Minis?
• View more questions